Bees Not Filling Outer Frames

Bees Not Filling Outer Frames – What You Can Do to Resolve it?

Beekeepers often face the problem of their bees not filling outer frames. It occurs especially by the end of the season. It’s a common problem that pretty much every beekeeper has to deal with.

So, what should you do when bees not filling outer frames?

The reason behind bees not filling the outer frames, might be either there are a lot of bees in the frames or a good flow of nectar in the flowers are not enough. To make them work in the frames, keeping sufficient foods in the right place and flower plants with good nectar can help.

Does the information seem useful to you? Great! We have a full segment here discussed on the methods to help you out. Hop on! 

Bees Not Filling Flow Frames – What to Do?

The following are the two primary factors that we have discovered that boost the pace during which the bees fill out the Flow Frames:

Reason 1: A Good Flow of Nectar

The first reason might be that there is not a good amount of flowers. Honey will not be preserved in your hive, no matter how many bees there are. 

Solution: Keep sufficient flower plants surrounded by lots of nectar.

Reason 2: There are a Lot of Bees in the Frames

This is the most important component. If there aren’t many bees while you look in the back and side windows, it will likely take a little time out for the bees to gather and start work on the Flow Frames.

If there are a lot of bees in the frames the comparison of the weight of the honey frame is also a matter of concern. It can disturb the mechanism of the framework so the bees won’t be building on frames.

Solution: Keep space for the bees so that the mechanism doesn’t get disturbed.

Pro Tip: How to Get the Bees to Start Working on the Flow Frames?

Timing is everything – only apply the Flow Super after the brooding box is full with bees when the last wood frame has also been built up. Ascertain that the season is appropriate and that there will be some flower plants for the bees to obtain nectar.

Remove some or all of the other honey flow frames on the hive so that the Flow Frame may fill with bees. It doesn’t matter how long does it take bees to fill a frame, This will certainly result in considerably faster outcomes in building frames.

Putting some beeswax on the outside of the Flowing comb might encourage them to start working upon the Flow Frames sooner. So, this way bees build comb between frames. Here’s a look into how bees will swarm into the frames.

If you don’t have any beeswax in stock, don’t worry at all buddy. Here we have listed some of the best beeswax available in the market. Check them out-

If the beekeeper gives basic foundation sheets, the foundation acts as a guide for the bees as they build the honeycomb straight inside the timber framing.

However, the colony must still build a large number of combs with thousands of individual cells. This takes several weeks to complete. Now you know how to get bees to draw comb in honey super. 

You can use burr comb pieces, wax foundation, or wax cappings. The bees then will re-apply the wax towards the Flow Frames & begin working them.

Warm-up some beeswax & apply it to the Flow Frame’s surface. If you do this, be cautious but don’t get too much beeswax in the bottom of the cells or the upward movement system, as this may cause the mechanism to jam when it is time to harvest and bees not moving into second brood box.

The rate where the honeybees fill these Flow Frames differs widely. We’ve seen colonies finish all of the frames fast, usually within one week or two, while other hives take their time getting going for the first time.

Bees do not usually do what we expect them to. While comparing these two flow hives of equal strength next to one other, one customer noted that although one hive immediately filled the Flow Frames, the other one took its time getting started on the Flow Frames.

When the bees are having their time conserving nectar in the Flow Frames, you might try one of the options mentioned above. Please keep us updated on how your hive is progressing.

Pro Tip: Keeping Food in the Right Place

When you keep your kitchen as well as the dining area on the first story, you most likely don’t keep the food on the 2nd or 3rd floors. You want it to be easily accessible and retrievable. Bees are no exception. Why would they keep food three levels up if there’s still room all around the flowing frame?

That, I think, is exactly what is happening. Bees store excess nectar just outside of the brood nest until all the handy coves are full. The brood nest is diminishing at this time of year, providing them yet more space all the time.

Forcing Bees Can Ruin Everything

Although you may occasionally get bees to construct comb in the flow frames by baiting them, this is not a long-term solution. 

You may wind up with a chimney effect, where the bees grow up rather than out. Because the bees were lured into the honey supers, frames 1 and 10 or perhaps 1, 2, 9 & 10 in the brood nests may not be completely filled. 

Also, there are some conditions they follow strictly. They can’t survive long without their queen. Do you know will bees build comb without a queen? Well, no. They won’t.

Try to be patient with them. Once the brood chambers are filled, the bees will begin to construct the supers. If they don’t put anything at all in the supers for the entire summer, it’s because there wasn’t enough excess nectar. 

The quantity of honey bees stored is determined entirely by the amount of nectar available and has very minimal to do with how the honey supers are arranged. And bees don’t like to be caged all the time in the same way. If you forcefully do that, they might die.

How the Bees are Supposed to Start Filling the Frames?

The bees begin by sealing the connections at the upper part of each cell. They will either make fresh wax or recycle beeswax from somewhere else in the hive.

Then they begin to finish the cell walls.

When they are finished, they begin to fill the chambers with nectar.

The combs are then drawn out from the Flowing Frame with beeswax.

Typically, they begin in the center of each frame and work their way out to the edge. Although, each colony and group of working bees might be doing things a little differently.

They cover the cell with wax after the nectar is ready and also the cell is full.

When you notice predominantly capped cells in the ending frame view, the remainder of the frame is probably mostly covered and ready for harvesting.

FAQs

These are some of the most asked bee and bee frame related queries you will find – 

What’s the deal with my bees not filling the flowing frames?

“Why aren’t the bees filling the flowing frames?” is a commonly asked topic on Flow hive-related beekeeping Facebook pages and forums. The ability of bees to produce extra honey is based on two simple factors: The presence of nectar for bees to gather and transform into honey.

How long would it take bees to complete a frame?

How long would it require for bees to fill a frame?- new beekeepers commonly inquire. On a steady nectar flow, a healthy hive may easily fill a six-frame. Flows are great in a few weeks. It is fully dependent on the circumstances.

When there isn’t nectar, do bees fill their comb?

When there is a plentiful supply of nectar, bees will draw out a new comb. If there isn’t any nectar to produce honey within the super, what’s the point of wasting energy building a comb which will then sit empty? So, if you put a super on the hive during a drought, don’t predict the bees to fill up.

EndNote

Having said that, we will be parting our ways here. Hope these methods help you out to solve your problem of bees not filling outer frames. Till your next visit, try out these methods and let us know if it was helpful to you.  

Good luck!

Leave a Comment

Your email address will not be published.

Scroll to Top